Jin Dong machinery, PET machinery manufacturing and blowing is your best choice.
Items | Unit | Model | |||||
JD-0.6L-9 | JD-0.6L-6 | JD-2L-4 | JD-0.6L-4 | JD-0.6L-3 | |||
Molding specification | Clamping force | kg | 6500 | 48000 | 48000 | 4200 | 3200 |
Clamping stroke | mm | 120 | 120 | 120 | 120 | 120 | |
Stretching stroke | mm | 240 | 240 | 320 | 240 | 240 | |
Bottom stroke | mm | 60 | 60 | 60 | 30 | 30 | |
Preform pitch | mm | 76 | 76 | 114 | 76 | 76 | |
No. of Cav. | Cav. | 9 | 6 | 4 | 4 | 3 | |
Container specification | Max. Container volume | L | 0.65 | 0.65 | 2 | 0.65 | 0.65 |
Neck diameter | mm | 18-38 | 18-38 | 18-38 | 18-38 | 18-38 | |
Max. Container diameter | mm | 68 | 68 | 98 | 68 | 68 | |
Max. Container height | mm | 240 | 240 | 320 | 240 | 240 | |
Theoretical output | bph | 13000-12000 | 10000-9500 | 6000-4000 | 7000-6400 | 5400-5000 | |
Power specification | Total power | KW | 70 | 58 | 58 | 44 | 32 |
Heating power | KW | 60 | 49 | 49 | 37 | 25 | |
Compressor specification | Blowing pressure | Kg/cm² | 35 | 35 | 35 | 35 | 35 |
Air consuming | M²/min | 10 | 8 | 8 | 5 | 4 | |
Water chilling spec | Operating pressure | Kg/cm² | ≥4 | ≥4 | ≥4 | ≥4 | ≥4 |
Temperature range | ℃ | 5-20 | 5-20 | 5-20 | 5-20 | 5-20 | |
Refrigerating capacity | Kcal/hr | 27950 | 25800 | 25800 | 20124 | 12229 | |
Flow rate | Kg/cm² | 5.6 | 5.16 | 5.16 | 4.1 | 2.45 | |
Water cooling spec | Operating pressure | Kg/cm² | ≥4 | ≥4 | ≥4 | ≥4 | ≥4 |
Temperature range | ℃ | ≤30 | ≤30 | ≤30 | ≤30 | ≤30 | |
Flow rate | M³/h | 6.7 | 6.2 | 6.2 | 4.8 | ||
main machine spec | size | mm | 4930*2110*2500 | 4200*2050*2500 | 4200*2050*2600 | 3232*1782*2110 | 2980*1560*2100 |
weight | kg | 8000 | 5500 | 5500 | 4500 | 4000 | |
Whole set spec | size | mm | 6150*4130*2700 | 4845*4420*2700 | 4845*4420*2800 | 4440*4310*2800 | 4750*3300*2800 |
weight | kg | 9000 | 6500 | 6500 | 5500 | 4500 | |
Note: 1. Due to continuous research and improvement, the above technical parameters are subject to change without notice. 2. If the customer has the special technical parameter request, it needs to order specially. |
No. | Name | Brand |
1 | Programmable controller | OMRON (Japan) |
2 | Operation panel | KUNLUNTONGTAI (Beijing sin-foreign joint venture) |
3 | Clamping servo motor | Yaskawa (Japan) |
4 | Stretch servo motor | Yaskawa (Japan) |
5 | Stellar reducer | SINB (Japan) |
6 | Ejector servo | Yaskawa (Japan) |
7 | High pressure blow value (with air source recovery system) | Parker (American) |
8 | Machine hand rotates the cylinder | REXROIH (Germany) |
9 | Machine hand gripper cylinder | Mindman (Taiwan) |
10 | Machine hand lift cylinder | AP or PNEULEAD (Italy) |
11 | Outlet cylinder operated by a machine hand | AP or PNEULEAD (Italy) |
12 | Machine hand into the embryo into the cylinder | AP or PNEULEAD (Italy) |
13 | Bottom of cylinder | AP or PNEULEAD (Italy) |
14 | Sealing of cylinder | LOKWAH ( sin-us joint venture) |
15 | Into the blank slide table cylinder | AP or PNEULEAD (Italy) |
16 | Pressing cylinder | AP or PNEULEAD (Italy) |
17 | Action valve | AP or PNEULEAD (Italy) |
18 | Split air cylinder and action valve | AP or PNEULEAD (Italy) |
19 | Points embryo cylinder and action valve | AP or PNEULEAD (Italy) |
20 | Control button、intermediate relay | AB (American) or SCHNEIDER (French) |
21 | AC contractor、 thermal relay | AB (American) or SCHNEIDER (French) |
22 | Voltage intelligent regulator | AB (American) or SCHNEIDER (French) |
23 | Silicon controlled rectifier | Carlo (Swiss) |
24 | Infrared tungsten lamp | HAICHUANG (Zhejiang) |
25 | Frequency conversion governor | DANFOSS ( Danish) |
26 | Light box fan | HAOYUNFENG (Taiwan) |
27 | Cooling fan | HAOYUNFENG (Taiwan) |
04.
The constant temperature heating box is of straight arrangement structure, and equipped with circulating air cooling, frequency converter to control the exhaust system, so as to ensure the internal constant temperature of the heating box, so that each heating bottle embryo is heated uniformly, and improve the rate of finished product.
05.
The circulating cooling water protects the bottleneck does not deform when the bottle embryo is heated.
06.
Mold positioning and installation can easily and quickly complete mold replacement within half an hour.
07.
The important parts of the whole machine (such as: electrical parts, pneumatic parts, servo reducer and so on) are European, American and Japanese brand products, which ensure the reliability and life of the equipment.
08.
Application: Plastic jar bottle, like the juice bottles, vegetable juice bottles, milk bottles, Carbonated drinks bottles, etc., widely used
Copyright ©2019Zhongshan Jindong Machinery Co., Ltd| Copyright
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
Product Message